FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6463 Discussions

IP Core Resource Center for TSE, SDI, SPI4.2, PCIE, SRIO and 10GbE

Altera_Forum
Honored Contributor II
2,969 Views

I found the following IP Core Resource Centers which have useful links to application notes, reference designs, online trainings, knowledge database and etc. You may find them useful:  

 

Triple Speed Ethernet (TSE) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-tse.html 

 

Serial Digital Interface (SDI) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-sdi.html 

 

POS-PHY Level 4 (SPI4.2/PL4) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-spi4.html 

 

PCI Express (PCIE) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-pcie.html 

 

Serial RapidIO (SRIO) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-srio.html 

 

10-Gbps Ethernet (10GbE) 

http://www.altera.com/support/ip/interface-protocols/ips-inp-10gbe.html
0 Kudos
16 Replies
Altera_Forum
Honored Contributor II
580 Views

Hi GuruDog, 

 

Thank you for these documents.  

 

Best regards, 

 

Jeremy. 

 

Press enter to look up in Wiktionary or ctrl+enter to look up in Wikipedia
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

Thank you for these useful links. 

 

I do have a question though. 

 

I downloaded and adapted the demo design for 10Gb Ethernet. 

This demo design includes a verilog Ethernet frame generator, a verilog Ethernet frame monitor, and instantiates an example 10Gb Ethernet IP. Various loopbacks are available. 

The demo design also includes a NIOS based SOPC system, but this is simply used for configuration (no OS, no TCP/IP stack). 

 

With this design, I can (theoretically, at least!): 

- test a single board of mine (using internal loopback) 

- test 2 boards of mine (one sends and receives, the other one loops back) 

 

Yet, I'd like to make a 3rd test. I would like to "ping" one of my board from a PC with minimum modification. 

My question is: do I really need to implement an OS, a Niche style TCP/IP stack? Is it naive to believe I can simply loopback the frames received from the PC into the transmitter with minimum byte analyze and overrides (no software)? Is there a design reference or a tutorial applicable here? 

 

Thank you in advance! 

 

Jankzov
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

Hi GuruDog, 

 

Thanks for the links. I downloaded Triple Speed Ethernet (TSE) ref design but it is not compiling in Quartus v9.1 and more over I am not able to generate SOF(Program files in v8.0). It would be great if some one can help me. Pls Pls Pls  

 

Warning: Can't generate programming files for project because design file "C:/altera/tse_datapath_reference_design/tse_ref_design/crcgen_altcrc.v" is encrypted. It does not have license file support that allows generation of programming files. 

Warning: Can't generate programming files for project because design file "C:/altera/tse_datapath_reference_design/tse_ref_design/crcchk_altcrc.v" is encrypted. It does not have license file support that allows generation of programming files.
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

Hi GuruDog, 

 

The links are very helpful! Thank you very much. 

 

How about SATA/SAS IPs? It seems that they should be at the same page. 

 

I found one white paper and a couple of other Altera documents saying that SATA and SAS are supported. Then I tried Quartus II 9.1 and searched the IP directory and browsed the document directories, I could not find SATA and SAS like those you listed. 

 

Any insights? 

 

Thanks again, 

 

Tom
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

hello all, 

 

please create a new thread when you ask questions so everyone can see the title and try and help. 

 

Tom, i don't think Altera has SATA or SAS cores, only their partners do.
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

This is a very good resource centre

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

thank you for links

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

3Q~~~~~~~~~

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

Hi GuruDog, 

 

Thank you for these documents.  

 

Best regards, 

jack hoa
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

thanks a lot

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

This is a very good resource centre ,thank you

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

thanks for your sharing 

 

 

Will 

 

 

chrome://livemargins/skin/monitor-background-horizontal.png chrome://livemargins/skin/monitor-background-vertical.png chrome://livemargins/skin/monitor-play-button.png
0 Kudos
Altera_Forum
Honored Contributor II
580 Views

thank you for links

0 Kudos
Altera_Forum
Honored Contributor II
580 Views

 

--- Quote Start ---  

With this design, I can (theoretically, at least!): 

- test a single board of mine (using internal loopback) 

- test 2 boards of mine (one sends and receives, the other one loops back) 

 

Yet, I'd like to make a 3rd test. I would like to "ping" one of my board from a PC with minimum modification. 

My question is: do I really need to implement an OS, a Niche style TCP/IP stack? Is it naive to believe I can simply loopback the frames received from the PC into the transmitter with minimum byte analyze and overrides (no software)? Is there a design reference or a tutorial applicable here? 

--- Quote End ---  

 

 

hi Jankzov, 

 

You should have completed your project. I am trying the third test you did before. If you can share with me some experience. How did you connect the two boards with 10GbE design? In the document, for testing in hardware, they do not have generator/checker, so did you have to use the 'remote partner' that can generate, transmit, receive and check the data?  

 

Thanks a lot.
0 Kudos
Altera_Forum
Honored Contributor II
580 Views
0 Kudos
Reply