Sharing the ASMI interface problem

FPGA Intellectual Property

PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP

Sharing the ASMI interface problem

884 Views

Hi,

I am trying to get access to the external SPI flash (EPCQ256) from a microcontroller through the Cyclone V fpga. I have created the altera_serial_loader IP block to get access to the flash. I am able to write into the flash (to the pin DQ0) but while reading from the flash(from the pin DQ1), the data from the pin for which the output data is being sent is not being connected to the IP block's data_out pin. I have set the data_or pin in the IP block to "4'd1" in which except for the AS data pin 0 all the other 3 pins should act as an input, but I am having trouble in getting the data out to the IP block(i.e.) the output pin from the flash to get connected to the IP block.

If anyone knows the solution for this problem, kindly guide me through in what I should do.

Thanks,

Sid

Link Copied

0 Replies

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.