Tried HD-SDI in smaller GX15 package?

[Altera_Forum]

Hi, 

 Has anyone tried using Altera's IP-SDI with HD-SDI on smaller package like the C4-GX15 or GX22 ?  Anyone knows why Altera do not want to support HD-SDI in a device where the transceiver is capable of handling twice the required speed. Then What's the point of even putting transceiver into these chips?  Puzzled, Paul

[Altera_Forum]

Maybe not enough PLLs? Impossible to meet timing? Ask Your Altera FAE.

[Altera_Forum]

Well, I do not think so. There must be a MPLL that is "absorbed" into the IP-core block for it to work. The same fabric with similar speed, as specified in the datasheet for all the different die size. The only difference is the lead-frame, which lead to slightly lower speed limit on its I/O pin. To add to the gist, the whole chip does nothing but just a transceiver and IP-core. Utilization is less than 5% !! 

 Asking FAE, will be difficult, as some are 'hiding' behind the published user's guide and try to give me a 'textbook' answer.

[Altera_Forum]

Then it's probably marketing.

[Altera_Forum]

More like marketing and resources now. It is badly maintained, with too much inflexibility around a so-call FPGA. It tells you, can do this and that in the datasheet and handbook, but Quartus will not allow it.