FPGA Intellectual Property
PCI Express*, Networking and Connectivity, Memory Interfaces, DSP IP, and Video IP
6343 Discussions

VIP Suite (CVI, Frame Buffer, CVO) Vertical Ancillary packet problem

Altera_Forum
Honored Contributor II
1,189 Views

Hello, 

 

I need help on how to successfully transport the Vertical Ancillary (VANC) packet from with the configuration below. 

----(embedded video sync)---> CVI ---> Frame Buffer ---> CVO ----(embedded video sync)----> 

 

The input video format is 1080i60, Vertical ancillary packet at lines 19 and 20 for Field 0 and lines 582 and 583 for Field 1. 

 

CVI setting : Extract ancillary packet (checked) 

Frame Buffer setting: Set the value of non-video packet handling setting to maximum. 

CVO setting : set the appropriate ancillary insertion lines 

 

The problem is that all the vertical ancillary packet has been concatenated in line 19 of Field 0 as seen on the output of CVO. 

When I tried to simulate using a smaller video size (i.e. 128x128) and set the ancillary line for Field 1 to the appropriate line number for 128x128 video size, I have noticed that cause of the concatenation is from the Frame Buffer. 

I am using Quartus 14.1. 

 

Does anyone experienced this problem? 

 

Thank you. 

 

Zeahr
0 Kudos
0 Replies
Reply