FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits

10M02SCE144C8G

Grantwt
Beginner
1,323 Views

Hi,

 

Can someone send me a link to where I can find the footprint and pin connection for the 10M02SCE144C8G, as I need to do a PCB layout and I need to know what pins to connect up.

0 Kudos
4 Replies
AminT_Intel
Employee
1,290 Views

Hello,

 

Sorry to let you know that Intel FPGA do not provide support for PCB footprint symbols for FPGA and CPLD device families, similar to configuration devices.

However, we will continue the support by providing the schematic symbol which you can download from the link below. You could have the schematic symbol in .olb format from the link below:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/board-layout-test/pcb/pcb-cadence.html

 

Here is the document for Intel® MAX® 10 FPGA Device Family Pin Connection Guidelineshttps://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/max-10/PCG-01018.pdf

 

Thank you.

0 Kudos
Grantwt
Beginner
1,265 Views

Here what am looking for:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/max7k/archives/epm7128e.pdf

 

But for the 10M02SCE144C8G, so therefore I am now using the EPM7128 as I have mode up the required PCB foot print, and  it is able to work with 5v TTL directly, which is a big advantage in this application. As for the *.olb file, all I get is unknown file format and it has no use to me for PCB development work.

 

,

0 Kudos
mrblack
Beginner
581 Views

Looking to verify if the following marking is correct for this part number.

 

mrblack_0-1709070565983.png

 

0 Kudos
mrblack
Beginner
550 Views

Please disregard.  I was able to find out.

0 Kudos
Reply