FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
Announcements
All support for Intel NUC 7 - 13 systems has transitioned to ASUS. Read latest update.
5849 Discussions

Arria 10 SoC - Boot from SD Card

fpga_2022
Beginner
876 Views

hi,@EBERLAZARE_I_Intel,i do run "make generate_from_tcl" first。

 

i want to reply you, but,the reply button is not work。

fpga_2022_0-1656056989373.png

 

0 Kudos
3 Replies
EBERLAZARE_I_Intel
858 Views

Hi,


Can you share your full design and I try them from my side?


0 Kudos
EBERLAZARE_I_Intel
847 Views

Hi,


If you still having issue with the reply button, can you attached the design in email along with this link, to my email: eber.lazareen.ignatius@intel.com


We may proceed with the communication there.


0 Kudos
EBERLAZARE_I_Intel
827 Views

Hi,


Update:


Case is solved via email:


Unfortunately above commands are not supported to be executed in WSL, only in Linux, you can install a Virtual Machine, and do the commands.


  • How to convert sof to rbf:

https://www.intel.com/content/www/us/en/docs/programmable/683536/current/converting-the-programming-file.html

You can follow the split rbf steps above.


  • When running "tools/mkimage -E -f board/altera/arria10-socdk/fit_spl_fpga.its fit_spl_fpga.itb" I get "sh: 1: dtc: not found"

To solve:

sudo apt-get install device-tree-compiler


0 Kudos
Reply