FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
Announcements
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.
4970 Discussions

--BeMicroSDK EPCS16 Nios II Flash Programmer

Altera_Forum
Honored Contributor I
950 Views

Hi, 

 

Recently I got a BeMicroSDK and tried to erase the EPCS16 using the Shell Script provided in the training material. It is working Fine.  

I have tried to restore the Factory Image using the Shell Script file. It is also working fine. 

 

I have made a small Nios II Project and attempted to Program the EPCS16 using Quartus II Ver 9.1 sp2. I have Added both SOF and ELF file from the Flash Programmer GUI. The SOF file is getting programmed in to the EPCS16 but my Application is not programmed in to the EPCS. The GUI is not returning any Error. 

 

I have attempted the same exercise is Quartus II Ver.11.0. I have tried both SOPC as well as Qsys to generate the system. The Flash Programmer GUI in Quartus II Ver 11.0 always throws the Error Code 3 or Error Code 8. 

 

I am not able to find the Error Code 3 or 8 in the Nios II Flash Programmer User Guide.
0 Kudos
2 Replies
Altera_Forum
Honored Contributor I
78 Views

how your EPCS is connect to a PC (usb blaster, byte blaster...) ??

Altera_Forum
Honored Contributor I
78 Views

BeMicro SDK itself having on board USB Blaster.

Reply