Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Altera_Forum
Honored Contributor I
1,128 Views

Current Sink from GPIO 3.3 LVTTL

Hello,  

I've designed a circuit to generate step and directoin signals for external stepper motor drivers. The input current for these drviers is "-1 mA" which I believe means I need to sink 1mA of current. Is the FPGA capable of sinking this much current? I have read that it can output up to 24mA but how much can it sink? I did not find this information anywhere. If anyone can help me I would really appreciate it!  

 

My board is a DE2-115 and the output pins are of the GPIO pins using 3.3 volt logic.
0 Kudos
2 Replies
Altera_Forum
Honored Contributor I
51 Views

 

--- Quote Start ---  

Is the FPGA capable of sinking this much current? 

--- Quote End ---  

 

Yes, the output characteristic of FPGA and CPLD I/Os is almost symmetrical. The sink capabilty will be even slightly higher than the source strength. Some numbers can e found in the DC characteristic part of the device data sheet, complete data for individual IO standards and current strength settings can be found in the ibis files.
Altera_Forum
Honored Contributor I
51 Views

Thank you very much.. I suppose my problem is somewhere else!

Reply