FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
5892 Discussions

Cyclone III DSP Development Kit - pin assignments to audio codec

Altera_Forum
Honored Contributor II
934 Views

Hi, 

I am working with Cyclone III Development Kit, 3C120 FPGA device, Quartus 9, and I am trying to program a simple audio loopback project using TLV320AIC23 audio codec, which is placed on HSMC data conversion board. 

I used the HSMC reference manual pdf to find pin assignments to the audio codec through HSMC: 

AD_SDIO - AD3 

AIC_BCLK - AA12 

AIC_DOUT - AB4 

AIC_LRCOUT - AA3 

AIC_SPI_CS - AB11 

AIC_XCLK - AA4 

However, there are 3 pin assignments that I could not locate in assignment editor: 

AD_SCLK - AH1 

AIC_DIN - W12 

AIC_LRCIN - Y11 

While trying to assign the pins to these locations, I got an error from Quartus: "can't recognize value PIN_<appropriate pin> as legal location". 

As I have checked in pin planner for this device (3C120F780C7), the W12 location seems to be stucked to VCC, Y11 stucked to GND and AH1 does not exist at all. 

 

Can somebody tell me the correct pin assignments that I should use to be able to work with the audio device? 

Thanks!
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
226 Views

Did you ever figure this out? Do you have a working example?

0 Kudos
Reply