Cyclone® V SE 5CSEBA6U23I7NDK: How fast an SDRAM be read and data put on FPGA port?

FPGA, SoC, And CPLD Boards And Kits

FPGA Evaluation and Development Kits

Cyclone® V SE 5CSEBA6U23I7NDK: How fast an SDRAM be read and data put on FPGA port?

331 Views

Hi,

We are planning to use the DE10 board for the test bench project.

Basically, it is an arbitrary waveform generator, the FPGA ports shall be connected to the 2 external DACs.

In this, need the data from SDRAM (16bits +16 bits) to be put out to the DAC at about 16Msps rate.

Is it possible to achieve this fast rate with this hardware set?

As the SDRAM is not connected directly to the FPGA so how much latency is expected?

Is it possible to use the DMA for this?

The total data to be sent out on FPGA ports is 64M x 16 bits x 2.

Thanks in advance!

Link Copied

0 Replies

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.