- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I got my DE0 Nano boar today. After some Problems wit Quartus Software I got version 11 running so far. I played a little bit with the sample designs and want now store the permanently on the board. So that when I turn on the board, the design is automatically started.Link Copied
4 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I got it. The board comes with flash memory in the serial configuration device. With help chapter 9 of the manual, converting pof into jic, I got the solution.- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
i'm having the same problem here. actualy, i read chapter 9 of the manual, but it still dont working, during the verifications it goes wrong.
when i deselect verify and blank-check there is no error, but the board dont work in the same way as it does when a program with a .sof file.- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
this is the report error:
http://img199.imageshack.us/img199/9426/capturarjj.png (http://imageshack.us/photo/my-images/199/capturarjj.png/) Uploaded with imageshack.us (http://imageshack.us)- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
i solved my problem, i was using quartus II 9.0. i dont know why, but that was the problem, i used quartus II 10.0 and now is working..
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page