FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits

DE10 Nano J8 2x5 pins

Altera_Forum
Honored Contributor II
2,119 Views

Hello, 

 

What are the pins for the J8 2x5 header on the DE10-NANO? The manual says  

 

"In addition, the DE10-Nano has one external JTAG Header (J8) reserved for users toconnect to JTAG chain of the DE10-Nano via external blaster. The J8 header is not installed, 

so users need to solder a 2.54mm 2x7 male pin header if it is necessary." 

 

J8 is actually 2x5. Nowhere is there a description of the 10 pins. Does anyone know what the pins are? 

 

Thanks
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
1,110 Views

Look at the bottom center of page 10 of the schematic (last line of the documents table). 

 

Files are available here: http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=165&no=1046&partno=4
0 Kudos
Reply