FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
6133 Discussions

DE10 Nano J8 2x5 pins

Altera_Forum
Honored Contributor II
‎01-19-2018 07:55 AM
2,094 Views

Hello, 

 

What are the pins for the J8 2x5 header on the DE10-NANO? The manual says  

 

"In addition, the DE10-Nano has one external JTAG Header (J8) reserved for users toconnect to JTAG chain of the DE10-Nano via external blaster. The J8 header is not installed, 

so users need to solder a 2.54mm 2x7 male pin header if it is necessary." 

 

J8 is actually 2x5. Nowhere is there a description of the 10 pins. Does anyone know what the pins are? 

 

Thanks
0 Kudos

Link Copied

1 Reply
Altera_Forum
Honored Contributor II
‎01-19-2018 08:08 AM
1,085 Views

Look at the bottom center of page 10 of the schematic (last line of the documents table). 

 

Files are available here: http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=165&no=1046&partno=4
0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.