Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Altera_Forum
Honored Contributor I
746 Views

DE2 Jtag Chain 5V Programming

Hi, 

 

I have a DE2-70 from terasic with EP2C70F896. This board includes a jtag chain output from it's byteblaster circuit.  

 

I also got 2 MAX EPM7064S which are 5V CPLD's from MAX7000S series.  

 

I was wondering if programing those max devices through DE-2 Board is possible? I can see 3V interface connection from DE2 board from the schematic. (see the picture for the connection to header ) 

 

http://www.alteraforum.com/forum/attachment.php?attachmentid=744&stc=1&d=1226430993
0 Kudos
1 Reply
Altera_Forum
Honored Contributor I
57 Views

The shown connector (which is unassembled in regular DE2 boards) is intended for programming of on-board EPM3128 and 93C46, not as a JTAG output. The on-board USB-Blaster has a fixed chain connected to Cyclone II and an AS programming option.

Reply