FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
5892 Discussions

EMMC daughter board for Arria 10 GX FPGA Development Kit

haianhle
New Contributor I
853 Views

Hi,

I want to prototype my EMMC controller on Arria 10 GX FPGA Development Kit.

Is there any EMMC daughter board which I can connect to my development kit and map to FPGA logic ? (not HPS interface like Stratix 10)

0 Kudos
10 Replies
haianhle
New Contributor I
828 Views

Hello,

Can someone help me on this issue?

0 Kudos
AR_A_Intel
Employee
762 Views

Hi Sir

 

Welcome to INTEL forum. May we know, is this the board that you refer to? https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/arria/10-gx-signal-integrity.html


0 Kudos
haianhle
New Contributor I
755 Views

Hi,

 

My board is https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/arria/10-gx.html

 

I'm looking for HILO EMMC memory daughter  board which I can connect to FPGA IOs not HPS IOs. Please help to check the solution I can use.

0 Kudos
AR_A_Intel
Employee
742 Views

Hi

Upon checking with teammate. Regrettably, the HiLo is use for ddr/qdr memory only. EMMC with HiLo connector is not available as the EMMC is not highspeed device support. 


0 Kudos
haianhle
New Contributor I
729 Views

Hi,

Is there any other connector type which I can use to connect EMMC daughter board to A10 GX kit?

Basically, I want to implement the EMMC controller IP on FPGA so I can not use the EMMC connection to HPS.

0 Kudos
haianhle
New Contributor I
709 Views

Hi,

If I try to create the new EMMC daughter card which have HILO or FMC connector. Is there any issue with FPGA IOs for EMMC device connection? Such as HILO IOs is 1.5V, FMC IOs is LVDS type ...

0 Kudos
AR_A_Intel
Employee
580 Views

Hi

 

I’m not familiar with EMMC daughter card connector. Let me check with teammate on this. We will get back with an update.


0 Kudos
Farabi
Employee
575 Views

Hello,


I just realized, you are using Arria 10 GX, and not Arria 10 SoC. eMMC flash is only supported by Arria 10 SoC devices. link : https://www.intel.com/content/www/us/en/support/programmable/support-resources/devices/supported-flash-devices-for-arria-10-soc.html


Please check the supported flash device by A10 GX here: https://www.intel.com/content/www/us/en/docs/programmable/683698/21-1-19-1-0/supported-flash-memory-devices.html


regards,

Farabi


0 Kudos
haianhle
New Contributor I
426 Views

Hi Farabi,

I knew eMMC was supported by Arria 10 SoC HPS part. What I'm trying here is demo the EMMC controller in FPGA part not using HPS part so it is possible with Arria 10GX board. I want to check what type of EMMC daughter board connector can I use to design the custom daughter board.

 

0 Kudos
AR_A_Intel
Employee
503 Views

Thanks for update answer @Farabi. We have not heard from you and hope the last note clears up this matter. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you


0 Kudos
Reply