Flex would like Intel do FA for EP4CGX50DF27I7N

[JPeng7]

We captured some failed boards with the “Spare Parts final” failure step on 15235 model at FT.

• checked the related components no soldering issue and cosmetic issue no found.

• Take 3pcs failed boards to x-ray, no open or short issue found.

• Reheat the failed U18 BGAs, test still failed.

• Re-mounted the failed U18 BGAs ,test still failed.

• Remove the failed u18 and remount it in the passed board, the fail step and information is same.

Suspected the U18 BGA working abnormal. After replaced the suspect BGAs , the boards passed test process. So confirm that the fail symptom will follow the suspect BGAs.

[NurAiman_M_Intel]

Hi,

Thank you for contacting Intel community.

I will continue to support this case through Forum private message.

Regards,

Aiman

[JPeng7]

Hi, Support team

Pls. advise the progress, thanks!

Regards,

Jimmy

[JPeng7]

Hi, Intel Support team

Could you help response this case asap? Thanks!

Regards,

Jimmy

[Zawani_M_Intel]

Hi Jimmy,

I have share some update for the current status for this case via private message.

Please do let me know if you do not receive the message.

Thanks!

Wani

[JPeng7]

Hi Wani

I received the update but it doesn't what I want to.

Could you please expedite to  publish FA report asap, thanks!

Regards,

Jimmy

[Zawani_M_Intel]

Hi Jimmy,

I am sorry my previous message do not provide the info as you required.

I forward the request to internal team to put the case in fast lane. 

Wani