Getting the outputs resulta from a file in real time

[SATC]

Hello, everyone.

How can I get the results of outputs and registers with the usb cable from a simulation running in real time? I'm trying the Signal Tap but I would like to know about others resources.

Thank you!

[SyafieqS]

Hi Sarah,

You can use In-System Sources and Probes (ISSP). It allows you to monitor various signals in the design on the device with a JTAG interface. May refer to below link for details related to Design Debugging Using In-System Sources and Probes 

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qpp-debug.pdf (pg124)

Thanks,

Regards

[sstrell]

Note that In-system Sources & Probes is only "real-time" as far as how fast signal info is sent over the JTAG connection, so you're talking about kHz speeds.  You're not going to be able to see high-speed signals toggling with ISSP.

Signal Tap really is the main debug tool for looking at signals, through they are frozen at a moment in time.

#iwork4intel