Hello I AM BULIDING A SCHEME WITH INTEL MAX 10 , AND I WANT TO CONNECT THE JTAG IN THE NEXT CONSTELATION , Is it ok ?

[LBelo1]

[ShafiqY_Intel]

Hi LBelo1,

TCK pin should connected to 1kOhm pull-down resistor

and, I recommend to leave TDO pin unconnected if not used.

Please refer to MAX 10 pin connection guideline for more details:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/max-10/pcg-01018.pdf

Thanks

[LBelo1]

Hi WolfGang

Thank you very but,

is everything else is ok ?

thank you

[ShafiqY_Intel]

And for TDI pin, you need to pull-up to 10kOhm. (you are pull-down the TDI pin)

TDI & TMS = pull-up

TCK = Pull-down

TDO = leave unconnected or pull-up