Community
cancel
Showing results for 
Search instead for 
Did you mean: 
jjian40
Beginner
1,155 Views

Hello, I have purchased cyclone V GT FPGA development board. I would like to ask whether the HSMC port B interface's transmission and reception pins support LVDS or not? If not, please recommend a ADC which use 1.5-v PCML standard for me.

 
0 Kudos
1 Reply
AnandRaj_S_Intel
Employee
34 Views

​Hi,

 

Both HSMC port A and B supports LVDS interface.

You can check DIFFIO_TX_xx & DIFFIO_RX_xx FPGA pin are used by HSMC ports. And which supports true LVDS transmitter &  receiver channels on row and column I/O banks. Pins with a "p" suffix carry the positive signal for the differential channel.Pins with an "n" suffix carry the negative signal for the differential channel.

 

Please refer the pin connection guideline and schematic.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/cyclone-v/pcg-01014.pdf

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

 

Regards

Anand

Reply