Hi :) I am working with de10 nano with cyclon V. With Quartus. I want to integrate a SPI Slave. There is a "LTC"-connector which provides SPI ? Is it usable ? the pin map also shows an Arduino Header possiblity .. there it says also SPI ..

[JBlec2]

Is there a way to integrate an SPI slave without creating one in HDL ? On the de10 nano

[KhaiChein_Y_Intel]

Hi,

You may refer to SPI Slave to Avalon Master Bridge Design Example https://www.intel.com/content/www/us/en/programmable/support/support-resources/design-examples/intellectual-property/embedded/nios-ii/exm-spi-bridge.html

Thanks.

[KhaiChein_Y_Intel]

Hi,

You may check on the demo http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=205&No=1046&PartNo=4 (Arduino Shield) in Terasic official website. From this design example, you will understand how the NIOS control the LCD display through the SPI interface

Thanks.

[KhaiChein_Y_Intel]

Hi,

Do you have any questions?

Thanks.

Best regards,

KhaiY

[JBlec2]

Thank you. I already found a demo , (university program) with which I can control a little it bit the output of my hdmi via nios ( first goual)!

Ah but really important for me is also it to get some input from my keyboard via SPI . So maybe this will help if another way will not !

:D Thank you ! If I have trouble I will tell :D

It is the .zip file: "arduino shield" you linked. If not tell me :D Have a great time !