FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
6189 Discussions

If I use 1.35V for DDR3L and 3.3V for other IOs, what should be the voltage on VCCPD rail.

SKacc
Novice
526 Views

Recommended operating conditions of datasheet(av_51002) says "VCCPD must be 2.5 V when VCCIO is 2.5, 1.8, 1.5, 1.35, 1.25, or 1.2 V. VCCPD must be 3.0 V when VCCIO is 3.0 V. VCCPD must be 3.3 V

when VCCIO is 3.3 V."

 

0 Kudos
1 Reply
BoonT_Intel
Moderator
284 Views

Hi Sir,

With this combination, are you able to let the Quartue compilation pass fitter?

If it pass, then you can check the .pin file and see what voltage level should connect to the VCCPD pin.

Reply