FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits

Intel Agilex 7 HPS A53 core

Kiebach
Novice
434 Views

Hello,

This question is regarding:
Agilex 7 FPGA I-Series Development Kit(ES1 2x R-Tile & 1x F-Tile) DK-DEV-AGI027R1BES(Power Solution 1) AGIB027R29A1E2VR3

Using the instructions from:
https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderAgilex7
We were able to load u-boot-spl-dtb.bin to the OCRAM (@0xFFE00000) and see the u-boot serial output on teraterm.

I can successfully read/write registers on the A53 core0 but have difficulty with cores 123. I am not sure if core 123 are still being held in reset, or if they are running off in the weeds.

Please help with these specific questions concerning the HPS quad-core cortex-a53:

#1 What is the value of the cores123 RVBAR_EL3 registers? Note for core 0 that RVBAR_EL3  register has a value of 0xFFE00000 which correspond to the OCRAM.

#2 Are the cores 123 released from reset at the same time as core 0?

#3 Usually memory mapped registers exist to release an A53 processor from reset, probably by the MAX10?
Are such registers available to be accessed by A53 core 0?
And is there documentation for these registers?

Assuming that cores 123 also have RVBAR_EL3=0xFFE00000, I have placed firmware in DRAM and tried releasing each core from the u-boot spin table to branch appropriately, but this has not been successful.

Thanks

PS - Some useful documentation here, but nothing that answers above questions:
https://www.intel.com/content/www/us/en/products/details/fpga/agilex/7/resource.html
https://www.intel.com/content/www/us/en/support/programmable/support-resources/guided-journey/agilex7/software-development.html

Labels (1)
0 Kudos
2 Replies
aikeu
Employee
187 Views

Hi Kiebach,


We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible. 

Thank you for your understanding.


Do you still require help on the matter?


Thanks.

Regards,

Aik Eu


0 Kudos
aikeu
Employee
145 Views

Hi Kiebach,


As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.


Thanks.

Regards,

Aik Eu


0 Kudos
Reply