FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits

MAX10 ESD Withstand Voltage

Susan1
Beginner
628 Views

Please could someone tell me what the ESD withstand voltage is for the MAX10, please? Or where to find it, as I have been looking and cannot find them anywhere. Specifically it is for the 10M50DAF256C8G. Thank you.

0 Kudos
13 Replies
AminT_Intel
Employee
613 Views
Susan1
Beginner
612 Views

Unfortunately that link to the pdf didn't work/take me to the document.

AminT_Intel
Employee
596 Views

Hello,

 

Can you try to open the link on other browser? The link works well for me. 

 

Thanks

Susan1
Beginner
588 Views

It literally takes me here: -

Susan1_0-1639121409407.png

Please could you just send me the document instead?

Thank you.

 

Susan1
Beginner
571 Views

Please could you email me the actual pdf please, as the link does not work on anything. Thank you.

AminT_Intel
Employee
547 Views

Hello,

 

Are you referring to Reliability Report? If yes, you will need to have CNDA.

 

Thank you.

Susan1
Beginner
512 Views

I just need the value ESD HBM and CDM values, please? So I don't need a whole report, just these values. Then we will know what level of handling precautions are required.

AminT_Intel
Employee
361 Views

2021 reliability report is made and uploaded into RDC.

Since 2021 update, reliability report delivery process has changed.

The 2021 Reliability report of our PSG legacy products (20nm and older technologies) is available in Intel’s RDC System. Refer below link.

https://www.intel.com/content/www/us/en/design/resource-design-center.html

 

Content ID: 653451

Document title: 2021 Programmable Solutions Group (PSG) Reliability Monitoring Report

 

Now,  customer needs to visit RDC site and get the report by themselves.

Once visit to RDC, the customer can use keyword in search box to look for the reliability report.

Keyword: 2021 reliability monitoring

 

Since the reliability report is Intel confidential information, the RDC registration is required by the customer with CNDA.

If the customer cannot find out or cannot access 2021 reliability report, the customer is required for RDC registration, please get the registration in the RDC website.

The following links are direct links to understand about RDC access.

 

Resource & Design Center (RDC) - RDC User Guide

https://edc.intel.com/content/www/us/en/design/~/resource-design-center-rdc-user-guide/

 

How to Get Access - RDC User Guide

https://edc.intel.com/content/www/us/en/design/~/resource-design-center-rdc-user-guide/how-to-get-ac...

 

How Do I Request an Intel Resource & Design Center (RDC) Account?

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-design-cent...

 

Register for a Developer Zone Premier Account

https://www.intel.com/content/www/us/en/forms/developer/premier-registration.html

 

How to Sign In - RDC User Guide

https://edc.intel.com/content/www/us/en/design/~/resource-design-center-rdc-user-guide/how-to-sign-i...

 

When anyone download the RDC document from the RDC website, the downloaded document shows a watermark at all pages of the document background. That watermark is one’s own e-mail address.

We recommend that the customer perform self-registration to get the access to confidential RDC document.

Susan1
Beginner
508 Views

Looking at the White Papers "A Case for Lowering Component Level HBM/MM ESD Specifications and Requirements" back in 2018, can I assume that the MAX10 is 500V HBM level, and 250V CDM, as proposed in 2021, as this is what the industry was proposing?

AminT_Intel
Employee
348 Views

Hello,

 

May I know how did you make that assumption?

 

Thank you.

Susan1
Beginner
341 Views

Because there was no simple information for the single HBM and CDM values for this part forthcoming from Intel. These white papers cover IC's, then unless it's less, these values are the best information we currently have.

AminT_Intel
Employee
331 Views

Hello,

 

I am unable to validate that value other than the one they have from Reliability Report. 

 

Thank you. 

AminT_Intel
Employee
308 Views

 We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Reply