MAX10 JTAG Chain

[Tomoya3]

I will be daisy chaining two MAX10s(10M04SCU169C8G) in a JTAG daisy chain.
When writing the pof file, can Quartus Prime and USBBlaster identify FPGA1 and FPGA2 and write separate pof files?
How do I set up Programmer in Quartus Prime?

[FvM]

Hi,

you can manually edit the device chain or simply autodetect the devices and assign individual pof files.

[Tomoya3]

Thank you very much,

I will give it a try.

[Fakhrul]

Hi Tomoya3,

Can you follow the suggestion made by our community member, FvM, as mentioned above? Alternatively, after autodetect, you have the option to manually assign your preferred pof/sof file by right-clicking and selecting "Change File," then choosing your file.

Regards,

Fakhrul

[Fakhrul]

We would like to inform you that since we haven't received a response from you regarding our previous notification, we will now move this discussion to community support. If you have any new questions or concerns, we recommend starting a new thread to receive assistance from Intel experts. Alternatively, if you don't have any further inquiries, our community users will be here to help you in this thread. Your understanding is greatly appreciated.

[Tomoya3]

Hi, Fakhrul,

I followed FvM suggestion and I solved.

I understood to manually assign pof/sof file and select choosing file.

Thank you very much.

regards,

Tomoya3