FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
5892 Discussions

Need a pin assignments for kit FPGA Cyclone IV EP4CE6E22C8N

Altera_Forum
Honored Contributor II
5,042 Views

Dear Altera, 

 

My name is Phu Nguyen. I am looking for a file pin assignment for kit FPGA Cyclone IV EP4CE6E22C8N. I used to use kit DE2 and have a file exel DE2_pin_assignment but i can't find a file for kit FPGA Cyclone IV EP4CE6E22C8N. 

 

Can you give me or link of file pin assignment for kit FPGA Cyclone IV EP4CE6E22C8N. 

 

I look forward to hearing from you again. 

 

Thank you and best regards, 

 

Phu Nguyen
0 Kudos
5 Replies
Altera_Forum
Honored Contributor II
3,018 Views

Hi Phu Nguyen, 

Check Pin-Out Files for Intel FPGA Devices at the following link, 

https://www.altera.com/support/literature/lit-dp.html?1 

 

For Cyclone IV EP4CE6 Devices refer the following link, 

https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/dp/cyclone-iv/ep4ce6.pdf 

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance. 

 

Best Regards 

Vikas Jathar  

Intel Customer Support – Engineering 

(Under Contract to Intel)
0 Kudos
Altera_Forum
Honored Contributor II
3,019 Views

 

--- Quote Start ---  

Hi Phu Nguyen, 

Check Pin-Out Files for Intel FPGA Devices at the following link, 

https://www.altera.com/support/literature/lit-dp.html?1 

 

For Cyclone IV EP4CE6 Devices refer the following link, 

https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/dp/cyclone-iv/ep4ce6.pdf 

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance. 

 

Best Regards 

Vikas Jathar  

Intel Customer Support – Engineering 

(Under Contract to Intel) 

--- Quote End ---  

 

 

Dear Vikas Jathar, 

 

I have read 02 material which you offer, my problem is although i understand pin of chip but i don't know pin of kit FPGA Cyclone IV EP4CE6. 

 

Can you help me? 

 

Thank you for your time. I look forward to hearing from you again. 

 

Phu Nguyen
0 Kudos
Altera_Forum
Honored Contributor II
3,019 Views

Hi Phu Nguyen, 

Use E144 Column for pin assignment of FPGA Cyclone IV EP4CE6E22C8N from pdf attached in the previous post. 

Refer Cyclone IV Device Handbook. 

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance. 

 

Best Regards 

Vikas Jathar  

Intel Customer Support – Engineering 

(Under Contract to Intel)
0 Kudos
Altera_Forum
Honored Contributor II
3,019 Views

 

--- Quote Start ---  

Dear Altera, 

 

My name is Phu Nguyen. I am looking for a file pin assignment for kit FPGA Cyclone IV EP4CE6E22C8N. I used to use kit DE2 and have a file exel DE2_pin_assignment but i can't find a file for kit FPGA Cyclone IV EP4CE6E22C8N. 

 

Can you give me or link of file pin assignment for kit FPGA Cyclone IV EP4CE6E22C8N. 

 

I look forward to hearing from you again. 

 

Thank you and best regards, 

 

Phu Nguyen 

--- Quote End ---  

 

 

Hi, 

Can you tell the Kit name/model number. Each Kit Each Altera Kit has specific pin assignment charts. We can get you the pin assignments for your kit once you provide the Kit part number/Model aka, Altera DE1, etc.
0 Kudos
first_rain
Novice
2,812 Views

Hi

I have a chinese board 

which on its front is written cyclone IV and  mcc-c  under the clock. then on the core is written

Altera cyclone IV 

ep4ce6e22c8n

G ccaaa 1913a

 

on the back of the board is written Altera development core board 

model: MCC-B version V1R1

 

could you please help me with the pin assignment? I have been trying to findout which pins are connected to the 5 onboard LEDs.

0 Kudos
Reply