Not able to program Arria 10 FPGA developement or Factory reset through BTS

[Vivek_tiwari]

Hi,

When I am trying to program Arria 10 through programmer it's throwing this following error

https://community.intel.com/t5/FPGA-SoC-And-CPLD-Boards-And/quot-CONF-DONE-pin-failed-to-go-high-in-device-1-quot-Arria-10/m-p/546174

Error led is also glowing red all the time so I am also not able to factory reset FPGA board through BTS 

I have no Idea how can we pull conf_done pin high.

[NurAiman_M_Intel]

Hi,

Thank you for contacting Intel community.

May I know if you have refer to Arria 10 dev kit userguide when programming the board? Can you refer to the userguide below?

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_a10-fpga-prod-devkit.pdf

Let me know if you need further assistance.

Regards,

Aiman

[Vivek_tiwari]

Hi, 

I have tried everything which is written in the user guide.

I am still not able to program it.

[NurAiman_M_Intel]

Hi,

Thanks for your reply.

Per my understanding, you recieved this Error 209014: CONF_DONE pin failed to go high in device 1?

If yes, kindly refer to our KDB below:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd04172013_855.html

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd03282003_8747.html

Also, please try to use latest Quartus version. Let me know if it does not work for you.

Regards,

Aiman

[Vivek_tiwari]

How Can I make sure that nCE is connected to GND with this issue?

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd03282003_8747.html

[NurAiman_M_Intel]

Hi,

You can refer to pin connection guidelines:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/arria-10/pcg-01017.pdf

Regards,

Aiman

[NurAiman_M_Intel]

We do not receive any response from you to the previous answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.