Program the EEPROM via JTAG from Quartus Programmer on DE1-SoC
I have a DE1-SoC development board with a Cyclone V 5CSEMA5F31C6N FPGA and I'm using Quartus 18.1. I need the FPGA to be programmed in a non-volatile way: I followed the instructions in the manual to convert my .sof file (generated compiling a simple .bdf) into a .jic file, choosing Active Serial mode and EPCS128 both in Device and Pin Options and in the Convert Programming Files screen. However, when I start to program in Quartus Programmer (via USB Blaster), the process fails.
Is there any particular option that I'm missing to set?