FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
5921 Discussions

QuartusII fails Compilation after a component removed from SOPC

Altera_Forum
Honored Contributor II
‎10-12-2010 04:21 PM
923 Views

Hi, 

If a component is removed from SOPC builder, then it is regenerated by SOPC builder, QuartusII fails compilation. 

The errors are Port or other things of the removed component is still in the .v file. I have to manually remove those lines. But I thought it should have a way to re-instantiate the system. Can anyone give me some hints that what commands or scripts need to be regenerated or updated? 

Thank you, 

oneplusone
0 Kudos

Link Copied

1 Reply
Altera_Forum
Honored Contributor II
‎10-13-2010 12:03 AM
236 Views

you will have to remove any removed signals from the instantiation of the SOPC Builder module manually

0 Kudos
Copy link
Reply

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.