Stratix 10 SX SOC Development Kit L-Tile - Power Supply Information

[OmarHS]

Hey all,

I currently have a Stratix 10 SX SoC Dev Kit (DK-SOC-1SSX-L-D) and noticed that the AC power brick is missing. I'd like to confirm the power requirements for the board.

The datasheet mentions 12V, but it doesn’t specify the required Amps or Watts for optimal operation.

Thank you!

[AqidAyman_Intel]

Hello,

Let me check first and will inform you as soon as possible.

Regards,

Aqid

[AqidAyman_Intel · Accepted solution]

Hello,

Based on the development kit user guide, from the development kit summary, the board features power of 12V and 24A.

For the recommended operating conditions, the FPGA maximum power supported by the supplied heatsink/fan is 300 W.

Reference:

https://www.intel.com/content/www/us/en/docs/programmable/683303/current/development-kit-feature-summary.html

[OmarHS]

@AqidAyman_Intel , thank you so much for your support.

One last question, do you know if the DK-SOC-1SSX-L-D comes with a 12V 24A power brick? If so, do you know Intel sells a replacement? I've searched everywhere online but couldn't find a power brick with the same ATX 2x6-pin or 2x8-pin connector and power specifications.

[AqidAyman_Intel]

You may check with your local authorize distributor on the availability of the component's replacement.

Arrow: https://www.arrow.com/en/products/dk-soc-1ssx-h-d/intel?q=DK-SOC-1SSX-H-D

Mouser: https://www.mouser.com/ProductDetail/Intel/DK-SOC-1SSX-H-D?qs=zW32dvEIR3umqIxrTLEz8A%3D%3D

DigiKey: https://www.digikey.com/en/products/detail/intel/DK-SOC-1SSX-H-D/13211489?s=N4IgTCBcDaICIGkC0BlA8gYSQRhSgGkgBJJwgC6AvkA

Regards,

Aqid

[AqidAyman_Intel]

I hope the previous response was sufficient to help you proceed. As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.