UART Communication problem

[Altera_Forum]

Hi All, 

 I am using DE1 kit and connect UART to COM1 port of pc.I write a code in Nios to transfer a single character to hyperterminal. Also set all the settings like baudrate,flow control,parity etc..in appropriate manner.At the run time I can see the TXD LED blinking on the kit But I can't receive any character on hyperterminal.   Any suggestions ???

[Altera_Forum]

试用一下下面的代码。 

祝你好运！  Try to use the code as bellow. Best regards! #include "unistd.h" // UNIX API # include <fcntl.h> // UNIX API # include <stdio.h> // printf() # include <string.h> // strlen() # include "alt_types.h" //++++++++++++++++++++++++++++++++++++++ // &#20462;&#25913;UART&#21517;&#31216; &#24320;&#22987; // &#26681;&#25454;SOPC Builder&#35774;&#32622;&#20462;&#25913; //++++++++++++++++++++++++++++++++++++++ # include "system.h" # define my_uart_name UART_NAME //-------------------------------------- // &#20462;&#25913;UART&#21517;&#31216; &#24320;&#22987; //-------------------------------------- # define CHAR_NUM 8 int main() { int fd; alt_u8 *ptr; alt_u8 charBuf; // 100&#23383;&#33410;&#30340;&#23383;&#31526;&#32531;&#23384; alt_u8 num_temp1, num_temp2; // &#20020;&#26102;&#21464;&#37327; alt_u8 *msg1 = "Please Enter 8 charaters : "; alt_u8 *msg2 = " has been Rcved\n"; //++++++++++++++++++++++++++++++++++++ // &#21021;&#22987;&#21270; &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ ptr = charBuf; // &#25351;&#21521;&#23383;&#31526;&#32531;&#20914;&#21306; num_temp2 = CHAR_NUM; // &#27442;&#35835;&#20837;CHAR_NUM&#20010;&#23383;&#31526; num_temp1 = num_temp2; //----------------------------------- // &#21021;&#22987;&#21270; &#32467;&#26463; //----------------------------------- //++++++++++++++++++++++++++++++++++++ // &#25171;&#24320;UART &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ fd = open(my_uart_name, O_RDWR, 0666); // &#20197;&#21487;&#35835;&#20889;&#26041;&#24335;&#25171;&#24320;&#35774;&#22791;&#25991;&#20214; if (fd < 0) // &#22914;&#26524;&#25171;&#24320;&#22833;&#36133; { printf("error\n "); return 1; } //------------------------------------ // &#25171;&#24320;UART &#32467;&#26463; //------------------------------------ //++++++++++++++++++++++++++++++++++++ // &#36755;&#20986;msg1 &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ write(fd, msg1, strlen(msg1)); //------------------------------------ // &#36755;&#20986;msg1 &#32467;&#26463; //------------------------------------ //++++++++++++++++++++++++++++++++++++ // &#35835;&#21462;CHAR_NUM&#20010;ASCII&#30721;&#23383;&#31526; &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ while(num_temp1) // &#35835;&#21462;CHAR_NUM&#20010;ASCII&#30721;&#23383;&#31526; { num_temp2 = read(fd, ptr, num_temp2); ptr += num_temp2; num_temp1 -= num_temp2; num_temp2 = num_temp1; } //------------------------------------ // &#35835;&#21462;CHAR_NUM&#20010;ASCII&#30721;&#23383;&#31526; &#32467;&#26463; //------------------------------------ //++++++++++++++++++++++++++++++++++++ // &#36755;&#20986;&#35835;&#20837;&#23383;&#31526;&#21644;msg2 &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ write(fd, charBuf, 8); // &#36755;&#20986;&#35835;&#20837;&#23383;&#31526; write(fd, msg2, strlen(msg2)); // &#36755;&#20986;msg2 //------------------------------------ // &#36755;&#20986;&#35835;&#20837;&#23383;&#31526;&#21644;msg2 &#32467;&#26463; //------------------------------------ //++++++++++++++++++++++++++++++++++++ // &#20851;&#38381;UART &#24320;&#22987; //++++++++++++++++++++++++++++++++++++ close(fd); // &#20851;&#38381;&#35774;&#22791; //------------------------------------ // &#20851;&#38381;UART &#32467;&#26463; //------------------------------------ return 0; }