FPGA, SoC, And CPLD Boards And Kits
FPGA Evaluation and Development Kits
5783 Discussions

Voltage level increase in 1.15V rail

Safila
Beginner
258 Views

We are using 5AGXMB1G4F40C5G. While turning on FPGA IO voltage 3.3V, core voltage increases to 1.38V instead of 1.15V. We are using power sequencer UCD9090ARGZT. Due to increase in core voltage, we are observing OVF error in TI power sequencer tool. Please find the below queries and help us to resolve this at the earliest.

1. How 3.3V turning ON is affecting 1.15V rail?

 

0 Kudos
2 Replies
Fakhrul
Employee
213 Views

Hi Safila,


Thank you for reaching out.

Just to let you know that we have received your support request and I will be working with you on this.

Allow me some time to look into your issue. 

I shall come back to you with the findings.

 

Thank you for your patience.

 

Best regards,

Fakhrul


0 Kudos
Fakhrul
Employee
185 Views

Hi Safila,


I have noticed in the system, your question seems to be duplicated with the IPS case 00733891.

We will proceed to continue to support the IPS case 00733891.


Hence, I will set this as close, if you have any other questions in the future feel free to open a new case.


Regards,

Fakhrul


0 Kudos
Reply