arria 10 SoC boot

[User1580871742356367]

Customer Arria 10 SoC board fail to boot. It shows error message ERROR(CMD256-TAD10-NAL18) fromDS-5 debugger. 

ERROR(CMD256-TAD10-NAL18):
! Unable to display contents at location "S:0xFFFF000C"
! Failed to read 4 bytes from address S:0xFFFF000CERROR(CMD256-TAD10-NAL18):
! Unable to display contents at location "S:0xFFFF000C"
! Failed to read 4 bytes from address S:0xFFFF000C

Thank you for any ideas and suggestions.

[AnilErinch_A_Intel]

Hi ,

Hope you are doing fine 

Please refer to the similar issue and it mentions about the changes to be done to the scatter file and other possible issue scenarios. 

https://community.arm.com/developer/tools-software/tools/f/armds-forum/12152/ds-5-bare-metal-wait-error-after-run-debug

Please let us know whether it helps. 

Thanks and Regards

Anil

[AnilErinch_A_Intel]

Hi,

Please let us know whether referring to the similar issue

https://community.arm.com/developer/tools-software/tools/f/armds-forum/12152/ds-5-bare-metal-wait-error-after-run-debug

helped in addressing the issue mentioned.

Thanks and Regards

Anil

[User1580871742356367]

No, it's not same.

We've sorted it out. Thank you.