arria 10 soc development kit sof start progress failed

[srinivasan]

Hi,

I am using arria10 soc development kit(10as066n3f40e2sG)...i could configure the Fpga through JTAG with the given mode settings (switch)..but after dumbing the sof file, If i give start,the progress is not happening...It showing progress(failed)..

can anyone give solution for above error?

[YuanLi_S_Intel]

Hi,

Just want to clarify, are you saying that you could program the SOF initially, but after that, you cant?

Also, can you try to change the TCK frequency to 6MHz?

Thank You

[srinivasan]

Hi,
Yes..that sof problem solved..thanks for asking..
But I am getting calibration failure..
If so possible..can u please share the EMIF DDR4 with traffic generator working project folder for arria 10 SoC development kit

[YuanLi_S_Intel]

Hi,

I did a quick search on altera design store but unfortunately we dont have that. If the design example is not available in the Intel Arria 10 SX SoC Package Installer (Production Edition), that means we dont have it.

https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/arria-10-soc-development-kit.html

I would suggest you to create another forum thread to seek for expert's assistance.

Regards,

bruce