Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Altera_Forum
Honored Contributor I
765 Views

some problem about flash programmer

I'm using DE1 board and QuartusII 9.1 SP2 & Software Build Tools for Eclipse. 

 

I set the reset address to flash in sopc builder and  

set the .text to sdram in SBT. 

 

I use the SBT's flash programmer to download the *.elf file to flash and download the *.sof file the EPCS4, and the programmer's message shows the download is successful. 

 

But when I reset the DE1 board , the leds are not on . why ?
0 Kudos
1 Reply
Altera_Forum
Honored Contributor I
67 Views

And I have tried to download the *.pof file to EPCS, the result is the same__no leds on.

Reply