Celeron N3000 / ASRock Beebox N3000 - missing Over-/Underscan setting

[MArer]

• OS: Win10 Pro 64bit
• Driver: 10.18.15.4256
• Connection: HDMI with LG TV 1080p/50Hz.

Hi community,

with my newASRock Beebox N3000 (Celeron N3000) i've noticed some issues:

1. I like to setup a little bit of underscan, but driver utility doesn't show up this setting. Is there a solution for this?
2. Is there support for DTS-HD and TrueHD in Windows 10? It is working fine with Openelec/Kodi.

Thanks in advance

Cavaradossi

[IUman]

Please try uninstalling the driver and reinstalling the driver again to see if you get the same problem.

You can download the latest driver at:

https://downloadcenter.intel.com/download/25176/Intel-HD-Graphics-Production-Driver-for-Windows-10-64-bit-N-Series- https://downloadcenter.intel.com/download/25176/Intel-HD-Graphics-Production-Driver-for-Windows-10-64-bit-N-Series-

If that does not work I recommend waiting for a new Windows 10 driver to be released that will include these features for Windows 10

[MArer]

Big Thanks for reply.

Reinstalling the drive doesn't solve the issues. I could sole the underscan issue with a TV setting ("just scan"), but it would be great, if intel could provide soon a driver with support of DTS.HD and TrueHD passthough.

[MArer]

Any news related to a new driver with support for TrueHD and DTS-HD?

[IUman]

Our engineering department is working on solving issues with Windows 10 and the graphics driver; you can post or check for an update here:

/thread/77726?start=180&tstart=0 https://communities.intel.com/thread/77726?start=180&tstart=0

[MArer]

Unfortunately the drivers from link above doesn't work for N3000/N3150.

[IUman]

At this point I recommend updating the driver from the AsRock website as they are the proper drivers for your system.