Bios version Not showing 1.00.16 after upgrading to latest bios

[MBald3]

I grabbed the latest bios and flashed it on the Aero. However, when I check with aero-get-vresion.py it still lists the version as 1.00.13.

Attaching the cli clip where, following upgrading the bios, I checked again to see if I could unistall 1.00.13 and reinstall 1.00.16. It confirms that 1.00.16 is already installed.

root@intel-aero:~# ls

aero-bios-01.00.16-r1.corei7_64.rpm launch.sh mnt

root@intel-aero:~# rpm -ev aero-bios-01.00.13-r1.corei7_64

error: package aero-bios-01.00.13-r1.corei7_64 is not installed

root@intel-aero:~# rpm -i aero-bios-01.00.16-r1.corei7_64.rpm

warning: aero-bios-01.00.16-r1.corei7_64.rpm: Header V4 RSA/SHA1 Signature, key ID bb0396db: NOKEY

package aero-bios-01.00.16-r1.corei7_64 is already installed

root@intel-aero:~# aero-get-version.py

BIOS_VERSION = Aero-01.00.13

OS_VERSION = Poky Aero (Intel Aero Linux Distro) 1.6.2 (pyro)"

AIRMAP_VERSION = 1.8

FPGA_VERSION = 0xc2

AeroFC firmware version = 1.6.5

root@intel-aero:~#

[idata · Accepted solution]

Hello m1baldwin,

Thank you for your interest in the Intel Aero Ready To Fly drone. Can you please try to reinstall the latest "intel-aero-image" from the link bellow and skip the BIOS update form the Initial Setup. According to the software release notes that can be found on the page, Aero BIOS version is already updated to 1.00.16. https://downloadcenter.intel.com/download/27833/Intel-Aero-Platform-for-UAVs-Installation-Files?prod...Best regards, Eliza

[idata]

Hello m1baldwin,

Can you please let me know if the instructions provided worked? Thank you,Eliza

[MBald3]

Hi Eliza,

Yes this seemed to work. Thank you!

Michael