Community
cancel
Showing results for 
Search instead for 
Did you mean: 
FDAlt
New Contributor I
1,080 Views

Error while manually updating PX4 flight controller. "bootloader reports INVALID OPERATION"

Good Afternoon,

I am trying to upload the version of the PX4 flight controller on Intel-aero ready to fly drone.

I have followed those guides:

https://dev.px4.io/en/setup/building_px4.html https://dev.px4.io/en/setup/building_px4.html

https://docs.px4.io/en/flight_controller/intel_aero.html https://docs.px4.io/en/flight_controller/intel_aero.html

but anytime I try to run the command: make aerofc-v1_default upload, the sistem erases the old flight controller but while installing the new one (the PROGRAMING phase) it stops at 0% saying:

ERROR: bootloader reports INVALID OPERATION

aero-get-version.py returns the following values:

BIOS_VERSION = Aero-01.00.13

OS_VERSION = Ubuntu 16.04.5 LTS"

AIRMAP_VERSION = unknown

FPGA_VERSION = 0xc2

AeroFC firmware version = unknown

Do you have any idea to solve the problem?

Thank you

Francesco

0 Kudos
0 Replies
Reply