Community
cancel
Showing results for 
Search instead for 
Did you mean: 
栩张
Beginner
2,758 Views

How to get the recorded video in QGC?

Jump to solution

I point the record stream button but I can't find the recorded video.

BTW the link of the drone and the QGC is not stable when recording the video.it will lose link in the procedure.

and sometimes I want to use the R200 stream like:rtsp://192.168.8.1:8554/video13

 

the QGC will always wait for the video single without working.sometimes the video will come out.What's the problem?

I use the Mac as the host computer for QGC.

Thanks for your help.

Xupei

0 Kudos
1 Solution
idata
Community Manager
317 Views

Hello tuantuan91,

 

 

Thank you for your interest in the Intel Aero Compute Board.

 

 

Could you please tell me, if you have followed the steps listed in the following link, for Video Streaming on Mac OS?

 

 

https://github.com/mavlink/qgroundcontrol/blob/master/src/VideoStreaming/README.md

 

 

Regards,

 

Casandra

View solution in original post

10 Replies
idata
Community Manager
318 Views

Hello tuantuan91,

 

 

Thank you for your interest in the Intel Aero Compute Board.

 

 

Could you please tell me, if you have followed the steps listed in the following link, for Video Streaming on Mac OS?

 

 

https://github.com/mavlink/qgroundcontrol/blob/master/src/VideoStreaming/README.md

 

 

Regards,

 

Casandra

View solution in original post

栩张
Beginner
317 Views

Hi Casandra

Thanks for your help.

I haven't done this before.

Do you mean I just need to follow the Mac OS procedure then I will find the video in?

I'll try the method you sent to me.

Thanks

Xupei

栩张
Beginner
317 Views

Hi Casandra

The link you send me is about the video stream.

the stream may not stable when I use it.

but my main question is where to find the video I recorded by QGC.

Do you know what I mean?

Thanks

Xupei

栩张
Beginner
317 Views

Hi Casandra

I have followed the procedure you sent to me.

but I still can't find the recorded video in any where.

Thanks

Xupei

栩张
Beginner
317 Views

BTW the drone's system is Yocto

栩张
Beginner
317 Views

Hi Casandra

sorry to disturb you so many times.

I'm wondering how can I get the GPS data and IMU date from the drone.

I want use the drone to do some development and research in visual inertial odometry/slam.

These data is very important and it better to get these data in time synchronization condition.

Thanks

Xupei

idata
Community Manager
317 Views

Hello tuantuan91.

 

You are not disturbing in any way, I am here to help and I hope the following info will prove useful.

 

 

The GPS and IMU data can be found by using an API like DroneKit or Mavlink.

 

For DroneKit you can check out: http://python.dronekit.io/

 

For MavLink please visit: http://qgroundcontrol.org/mavlink/start

 

 

I would also advise checking out the following links I think they are also very useful:

 

https://github.com/intel-aero/meta-intel-aero/wiki/04-Autonomous-drone-programming-in-Python https://github.com/intel-aero/meta-intel-aero/wiki/04-Autonomous-drone-programming-in-Python

http://python.dronekit.io/automodule.html%3Fhighlight%3Dgps%23dronekit.GPSInfo http://python.dronekit.io/automodule.html?highlight=gps# dronekit.GPSInfo

http://python.dronekit.io/examples/create_attribute.html%3Fhighlight%3Dimu%2520data http://python.dronekit.io/examples/create_attribute.html?highlight=imu%20data

In regards to the video recording, I think this can shed some light:

 

https://www.ardusub.com/operators-manual/recording-video.html

 

 

Let me know if this works.

 

 

Regards,

 

Casandra
栩张
Beginner
317 Views

Hi Casandra

Thanks for your help.

I saw the recording method you sent to me.

but as the screen shot I put in previous you can see there is no save path in my QGC.

idata
Community Manager
317 Views

Hello tuantuan91,

 

 

 

Can you please send me a full screen shot of the General Tab in QGroundControl?

 

The options in the video and video recording settings is what I would like to see.

 

 

Thank you very much in advance,

 

Casandra

 

 

 

栩张
Beginner
317 Views

Hi Casandra

Thanks for your reply.

I have solve this problem by myself.

I will close this case now.

Thanks

Reply