- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hello,
What is the input voltage range for the power connector on the Intel Compute board? I have seen three different documented values:
1. 5V only (https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/intel-aero-compute-boar... https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/intel-aero-compute-boar..., section 3.6.1)
2. 5V-12V (Intel® Aero Compute Board Hardware Features and Usage v.1)
3. 5V-20V ( )
We would like to plug the battery directly into this power connector but a fully charged 3 cell battery is 12.6V, so this will only be possible if the third document is correct. On the Intel Aero RTF drone (which we are not using), there is a power module so the battery is not plugged in to the Intel Compute directly.
Dan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hello Dan,
Thank you for your interest in the Intel® Aero Compute Board.
As stated here https://github.com/intel-aero/meta-intel-aero/wiki/01-About-Intel-Aero, the recommended power adapter specifications are:
- 5V DC
- 3A (15 W) minimum
The latest version of the Intel® Aero Compute Board – Hardware Features and Usage ( https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/intel-aero-compute-boar...) also mentions the 5V as the recommended voltage input.
If you have another question, don't hesitate to contact us.
Have a nice day.
Regards,
Andres V.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hello Dan,
Thank you for your interest in the Intel® Aero Compute Board.
As stated here https://github.com/intel-aero/meta-intel-aero/wiki/01-About-Intel-Aero, the recommended power adapter specifications are:
- 5V DC
- 3A (15 W) minimum
The latest version of the Intel® Aero Compute Board – Hardware Features and Usage ( https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/intel-aero-compute-boar...) also mentions the 5V as the recommended voltage input.
If you have another question, don't hesitate to contact us.
Have a nice day.
Regards,
Andres V.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content

- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page