BIOS_VERSION = Aero-01.00.16
OS_VERSION = Poky Aero (Intel Aero linux distro) v1.6.2 (pyro)
FPGA_VERSION = 0xff
Aero FC Firmware Version = unknown
The command I am running to flash the fpga is:
#jam -aprogram /etc/fpga/aero-compute-board.jam
The jam file comes installed on the aero-linux under /etc/fpga/ directory. After the first successful attempt, every other attempt since then has failed right at the beginning and has never proceeded to flashing the CRM0. I dont know what might be the reason behind this.
One of the error messages is:
Jam STAPL Player Version 2.5 (20040526)
Copyright (c) 1997-2004 Altera Corporation
Device #1 IDCODE is 031820DD
full-chip erasing Max 10 FPGA device(s) ...
Device programming failure
Exit code = 10...Device programming failure
I know the device doesnt have hardware continuity problem and the JTAG connection is successful as it passes the READ_USERCODE & CHECK_IDCODE actions: