Intel® Collaboration Suite for WebRTC
Community support and discussions on the Intel® Collaboration Suite for WebRTC (Intel® CS for WebRTC).
Announcements
Welcome to the Intel Community. If you get an answer you like, please mark it as an Accepted Solution to help others. Thank you!
For the latest information on Intel’s response to the Log4j/Log4Shell vulnerability, please see Intel-SA-00646

VCA持久化镜像

Daghe
Beginner
212 Views

当我安装好VCA镜像现使用的是vca_persistent_centos7.2_1.3.48.img,vca与MCU在同一台主机,当我将主机重启时,rabbitmq需要启动,vca需要vcactl reset后执行vcactl boot vca_persistent_centos7.2_1.3.48.img才能连接上vca卡,且服务均需要重新启动,我想实现主机重启后不需bios reset 能够直接访问我的VCA卡,请问我是否需要自定义镜像?如果不是,如何实现,谢谢

0 Kudos
6 Replies
Qiujiao_W_Intel
Employee
212 Views

再确认下你的需求,是在主机重启之后不输入任何命令包括vcactl boot vca_persistent_centos7.2_1.3.48.img 就能直接访问VCA卡?还是说接受输入命令启动VCA,但是希望部署在VCA卡上的MCU模块比如video-agent能在VCA启动之后能够自动跑起来?

Daghe
Beginner
212 Views

是希望在主机重启后不输入命令,就能直接访问VCA卡,且video-agent能自动跑起来

Daghe
Beginner
212 Views

镜像问题有更新吗,谢谢!

Qiujiao_W_Intel
Employee
212 Views

最近国外同事好多休假,还需要再等等

Daghe
Beginner
212 Views

项目上需要尽快推动,请帮忙回复一下,谢谢

Qiujiao_W_Intel
Employee
212 Views

Daghe, 如果是希望开机就启动VCA的话可以把VCA boot的命令加到开机命令中,关于VCA持久化镜像我们这边目前没有完整验证过,暂时不推荐自定义VCA持久化镜像的方法,vca上自动启video agent的话可以尝试通过远程ssh操作进行

Reply