ITK can't import the "Fan Mode" and "Power State"

[ymo]

Hi all,

I have following the steps of the ITK User Guide October 1, 2019 for custom the BIOS, but the "Fan Mode" and "Power State" can't be import! ITK v6.1.9, STK2M364CC, BIOS version is CC0062.

1. Update to the latest BIOS version CC0062.
2. Set the BIOS to the default settings.
3. Set the "Fan Mode" from the "M1"(default) to the "M2"(Custom), set the "Power State" from the "Always On"(default) to the "Always Off"(Custom), reboot and verify the settings are both right.
4. Reboot to the UEFI shell and get my custom BIOS successfully with the command: ITK6.efi -b -x MYCC0062.bio -ib CC0062.bio -ic -il MY.jpg
5. Update the "MYCC0062.bio" and the logo change to the "MY.jpg".
6. Load the default settings of the "MYCC0062.bio", but the "Fan Mode" is back to the "M1"(default) from the "M2"(Custom), the "Power State" back to the "Always On"(default) from the "Always Off"(Custom).

How to fix this problem?

Best Regards

[ymo]

The full name of the ITK is:

Intel Integrator Toolkit.

https://downloadcenter.intel.com/download/26307/Intel-Integrator-Toolkit

[Wanner_G_Intel]

Hello ymo,

Thank you for submitting your question on this Intel® Community.

Please allow us to look into these settings in-house. We will update this thread as soon as possible.

Wanner G.

Intel Customer Support Technician

A Contingent Worker at Intel

[Wanner_G_Intel · Accepted solution]

Hello ymo,

We would like to update this thread.

Custom settings such as "Fan Mode" and "Power State" are not supported by the Intel® Integrator Toolkit.

Wanner G.

Intel Customer Support Technician

A Contingent Worker at Intel