Intel® Desktop Boards
Peer-to-peer support only
11475 Discussions

D2700MUD - reboots/failure?

idata
Community Manager
1,019 Views

Hi,

I am getting a terrible headache with this board.

I had it running very nicely, then moved the PC to another location and suddenly the motherboard reloads endlessly.

The board loads to the Intel logo (E7 es shown as the last status) and the it reboots. It can be seen here: http://youtu.be/1oP8zBUZqEI INTEL D2700MUD - YouTube

Hope someone has an idea how to solve the problem.

Thanks in advance,

Michael

PS, the board has the latest BIOS installed

0 Kudos
1 Solution
idata
Community Manager
177 Views

Hi Michael,

Proceed to take the board out of the chassis, unplug the power cord, remove all non-basic components, connect the power cord back in and try to boot up the system. If problem does not take place, try installing the other components one at the time until you find out which is the conflicting one. Clear the CMOS battery for 30 minutes and try to restore defaults in the BIOS.

View solution in original post

1 Reply
idata
Community Manager
178 Views

Hi Michael,

Proceed to take the board out of the chassis, unplug the power cord, remove all non-basic components, connect the power cord back in and try to boot up the system. If problem does not take place, try installing the other components one at the time until you find out which is the conflicting one. Clear the CMOS battery for 30 minutes and try to restore defaults in the BIOS.

Reply