Computer tech here since mid 90's. Fully working
Win7 x64
8GB RAM
i5-650
DH57DD
etc.
Shut it down normally from a fully functional state, then turned it back on, lights, work fans work, HDD's click as normal, (but doesn't go into windows) but NO VIDEO from HDMI or DVI on another monitor too. I've unplugged all the RAM, (no beeps), HDD/DVD, USB internal and external, nothing, no beeps no matter what. Can't shut it down except via the hlding down the power button 8 sec, etc. Number lock inoperable, but keyboard does flash all 3 lights when turning on. Reset the bios number of times, took out the battery, etc, etc, etc, I know how to troubleshoot. Dang. Did the board go bad or video modual on the intel CPU go bad? I've never seen an intel CPU go bad in 15 years.
I'll take any suggestions.
I haven't tried another videocard, PSU or CPU, but it should beep if there is no ram, it's something board related me thinks.
D
Hello klepper,
I understand that you are having problems with your system and that you are not receiving beep tones with no memory installed.
At this point I recommend you to test your motherboard out of the chassis and only have the basics connected. If you still do not get any beep tones with no memory installed, you should test your processor on another motherboard to determine if that is the cause, if it works you should contact the warranty department to make an RMA request.
Regards.
It was a bad board RMA'd it.
For more complete information about compiler optimizations, see our Optimization Notice.