- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Building a PC with this board, using
hynix 2GB 2Rx8 PC3-10600U ram module
550 watt PSU
Intel Core 2 Duo E6750
I get no picture and no bib
Have tried without RAM module, only CPU and fan, still no picture or bib !
The CPU fan starts and the green led on the board light up, but no display
Please help
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Please verify that your memory meets the specifications as define on page 15, in Section 1.5 of the technical specification:
https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/desktop-boards/P45_G45_Q45/D... https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/desktop-boards/P45_G45_Q45/D...…
Provide the EXACT model number of your memory modules.
Also, confirm that the processor is a KNOWN GOOD processor.
Doc
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Adding to Al's comments, you have listed the memory as being 2Rx8 (i.e. having two ranks). As is detailed in the TPS, 2R (x16) memory is NOT supported.
...S

- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page