Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
1,224 Views

DQ35JOE mainboard, Installed a HD7850 and I get this "A bootable device has not been detected.rom the FV]

The latest BIOS is installed and the SATA drive has been connected and disconnected with no difference. System stops with that message. The video card has been put into another system with a different board and does work without issue.

Mainboard Intel DQ35JOE

Video Card: Radeon HD7850 2GB

500W Power supply.

0 Kudos
3 Replies
Highlighted
Beginner
98 Views

The latest BIOS revision is 1143, should have included that in the post.

0 Kudos
Beginner
98 Views

After resetting BIOS to optimal defaults, I can now consistently get the Intel boot screen but the system freezes at 5A

0 Kudos
Highlighted
Community Manager
98 Views

Please try to boot without GFX Card ,possibly this board has VGA, OR DVI-I built-in ,

connect the data cable to your SATA Drive if boots Normally , then your GFX CARD either has problem or Not Matching BEFORE DOING THE ACTUAL WORK GO TO BIOS SETUP TO LOAD DEFAULT BIOS

HOPE YOU WILL DETECT AND SOLVE

ThanX