I have an Intel Desktop Board D101GGC does not remove the video and BIOS setup soquet gives this message "BIOS ROM checksum error" insert system
Link Copied
This was one of those Intel boards that had an ATI chipset and graphics. For me, they were somewhat problematic.
They have not been supported for a very long time.
You can find all files and documentation for this board here:
http://www.intel.com/content/www/us/en/support/boards-and-kits/desktop-boards/legacy-intel-desktop-b... Intel® Desktop Board D101GGC
Please explain your problem in better detail.
Doc
thanks for answering,
when you turn the pc does not video but the LED on the board is also on the processor fan if it works
when removing settings insurance plate pin 1 and 2 on the screen this message appears:
BIOS ROM checksum error
Detecting floppy drive A media
insert system disk and press enter
and download the BIOS upgrade and through a 3 1/2 disket try to load the BIOS and ran a program flashing the bios but do not give video reboot again
Did you still have the checksum error after the BIOS update attempt. If so, try replacing the CR2032 battery on the board.
For more complete information about compiler optimizations, see our Optimization Notice.