Intel® Desktop Boards
Peer-to-peer support only
This community is designed for sharing of public information. Please do not share Intel or third-party confidential information here.
11450 Discussions

Workstation Board W2600CR with NVME issue (pcie-ssd)


I am using the WD Black NVMe 256G SSD with PCIe to NVMe adapter connected, system as windows 10 version up-to-date.

But unlucky when start to format until 100% (low or quick format) show error and cannot competed.

after that the drive show partition format is RAW.

the BIOS version is up-to-date version R02.06.E006_rev2

0 Kudos
1 Reply
Community Manager

Hello, gregwong646. Thank you very much for contacting the Intel® Communities.



Firstly, allow me to mention that Intel Customer Service no longer responds to telephone, chat, or e-mail inquiries for this Workstation Board W2600CR but you may want to try our /community/tech/discontinued-products Discontinued Products Community to get recommendations from fellow community members. You may also find the Discontinued Products Website helpful to address your request". Please keep in mind that for discontinued products forums, there is only Peer-to-Peer support.



You may want to double check with Western Digital* Support if the PCIe to NVMe adapter you are using is supported.




Antony S.