Community
cancel
Showing results for 
Search instead for 
Did you mean: 
GWong
Beginner
985 Views

Workstation Board W2600CR with NVME issue (pcie-ssd)

I am using the WD Black NVMe 256G SSD with PCIe to NVMe adapter connected, system as windows 10 version up-to-date.

But unlucky when start to format until 100% (low or quick format) show error and cannot competed.

after that the drive show partition format is RAW.

the BIOS version is up-to-date version R02.06.E006_rev2

0 Kudos
1 Reply
idata
Community Manager
71 Views

Hello, gregwong646. Thank you very much for contacting the Intel® Communities.

 

 

Firstly, allow me to mention that Intel Customer Service no longer responds to telephone, chat, or e-mail inquiries for this Workstation Board W2600CR but you may want to try our /community/tech/discontinued-products Discontinued Products Community to get recommendations from fellow community members. You may also find the https://www.intel.com/content/www/us/en/support/discontinued-products.html Discontinued Products Website helpful to address your request". Please keep in mind that for discontinued products forums, there is only Peer-to-Peer support.

 

 

You may want to double check with https://support.wdc.com/ Western Digital* Support if the PCIe to NVMe adapter you are using is supported.

 

 

 

Antony S.
Reply