command GETQUOTA does not work

[STyur]

Since this sunday, command getquota does not work for me.

It send POST request to http://login-1:898/ and wait answer forever.

Please check.

[JEYANTHKRI_N_Intel]

Hi,

Thanks for reaching out to us,

We will contact our DevCloud Admin team and let you know.

[JEYANTHKRI_N_Intel]

Hi,

Could you please let us know whether the issue is resolved now? 

[STyur]

Unfortunately, not completely.

It does not work on login node:

Last login: Thu Dec 26 21:26:30 2019 from 10.9.0.249
u32955@login-1:~$ getquota 
curl: (7) Failed to connect to login-1 port 898: Connection refused
u32955@login-1:~$ ifconfig 
ens5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.9.0.1  netmask 255.255.128.0  broadcast 10.9.127.255
        inet6 fe80::5054:ff:fe09:1  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:09:00:01  txqueuelen 1000  (Ethernet)
        RX packets 555927952  bytes 2866226633646 (2.8 TB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 5303458484  bytes 7894273512823 (7.8 TB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

but it works from interactive session:

# Resources:           neednodes=1:fpga_compile:ppn=2,nodes=1:fpga_compile:ppn=2,walltime=06:00:00
########################################################################

u32955@s001-n147:~/Projects/compile_tf_graph$ getquota 
86.98 GB out of 200.00 GB (43.49%) used
u32955@s001-n147:~/Projects/compile_tf_graph$ 

[ywang273]

Hello, I have the same problem. Have you solved it?

[JEYANTHKRI_N_Intel]

Hi,

The issue is resolved now. Could you please confirm the same from your end. 

[STyur]

Yes! I confirm that the problem is resolved!

u32955@login-1:~$ getquota
88.35 GB out of 200.00 GB (44.17%) used
u32955@login-1:~$ 


u32955@s001-n147:~$ getquota 
88.35 GB out of 200.00 GB (44.17%) used
u32955@s001-n147:~$ 

[JEYANTHKRI_N_Intel]

Hi,

Thanks for the confirmation,we are closing the case.